About FAPlite Citroen/Peugeot OBD2
- Only for Peugeot and Citroen vehicles - Please note that this application will not work with bad ELM327 clone adapters which doesn't support extended protocol commands - Supported INJ ECUs: EDC15C2, EDC17C10,...
- Only for Peugeot and Citroen vehicles
- Please note that this application will not work with bad ELM327 clone adapters which doesn't support extended protocol commands
- Supported INJ ECUs: EDC15C2, EDC17C10, EDC17C10_BR2, DCM3.5, DCM3.5_BR2, HDI_SID803, EDC16CP39, DCM3.4, HDI_SID807_BR2, MED17.4.2, MM6LPB, MEV17.4_EURO4, DCM3.4P, HDI_SID807, MEV17.4_EURO5, MEV17.4.2, ME745, MED17_4_EURO5, SID201, DCM35_HY, J34P, MM6LP, ME749, MM6KP, EDC17CP42, EDC17CP11, MED17_4_EURO4, V46, DCM6.2, ME747, DCN2, V34.1, V46.21, EDC17C60, MED17.4.4, S2000PM2, MEVD17.4.4, VD46, V34.4, S2000P, SID801, ME7.4.4, ME749_EC5, M7.4.4, V46_6, V46_52, V34.3, DCM71v5, MD1CS003
- Supported gearbox ECUS: CFC300P, CFC300P_HY, AM6/AT6, AL6, BVMP_MA, AXN8
- Supported electric power steering ECUS: GEP, DAE_BVH2, DAE_A515, DAEv4, DAEv1
- ELM327 Bluetooth or WiFi adapter required
- Read real time information from your Engine Management ECU
- All sensors displayed like in DiagBox/Lexia manufacturer diagnostic (FAPlite version supports less parameters)
- Now you can check condition of used car before buying
- Faults reading and clearing
- Fast logging of sensors data and displaying in chart or table
- Testing of actioners like engine fan (in full version you get many more: EGR, fuel pump, air mixer, injectors...)
- Customizable display of sensors data
- Check condition of DPF/FAP and additive level
Previous Versions
Here you can find the changelog of FAPlite Citroen/Peugeot OBD2 since it was posted on our website on 2016-11-05 10:42:23.
The latest version is 1.62 and it was updated on 2024-03-27 15:16:44. See below the changes in each version.
FAPlite Citroen/Peugeot OBD2 version 1.62
Updated At: 2020-09-27
Changes: v1.62
- detection of many new ECU software versions for all supported ECU models
v1.61
- support for AXN8 gearbox ECU
- detection of many new ECU software versions for all supported ECU models
v1.60
- support for MD1CS003 ECU
- detection of many new ECU software versions for all supported ECU models
Please NOTE: if you use ELM327 clone adapter, check if it supports extended CAN protocol commands, else it will not work with this software.
FAPlite Citroen/Peugeot OBD2 version 1.61
Updated At: 2020-01-06
Changes: v1.61
- support for AXN8 gearbox ECU
- detection of many new ECU software versions for all supported ECU models
v1.60
- support for MD1CS003 ECU
- detection of many new ECU software versions for all supported ECU models
Please NOTE: if you use ELM327 clone adapter, check if it supports extended CAN protocol commands, else it will not work with this software.
FAPlite Citroen/Peugeot OBD2 version 1.60
Updated At: 2019-09-08
Changes: v1.60
- support for MD1CS003 ECU
- detection of many new ECU software versions for all supported ECU models
v1.59
- support for some of DCM7.1 ECUs
- support for steering DAE_CAN ECU
- more ME745 ECUs supported
Please NOTE: if you use ELM327 clone adapter, check if it supports extended CAN protocol commands, else it will not work with this software.
FAPlite Citroen/Peugeot OBD2 version 1.20
Updated At: 2017-01-01
Changes: v1.20,- support for J34P ecu,v1.19,- support for hybrid DCM35_HY ecu,- bug fixes and corrections for some parameters,v1.18,- support for SID201 ecu,- EDC17C10_BR2 - added injected flow and injection times reading,v1.17,- support for ME745,- support for MED17.4 EURO5,- fix for some faults not being cleared,Please NOTICE again: if you use ELM327 clone adapter, check if it supports extended CAN protocol commands, else it will not work with this software.
FAPlite Citroen/Peugeot OBD2 version 1.12
Updated At: 2016-11-01
Changes: v1.12,- support for MM6LPB ecu,v1.11,- first petrol ecu supported MED17.4.2 with 55 sensor readings, including knock sensor, cylinder advance corrections, inlet camshaft dephaser...,- Please NOTICE again: if you use ELM327 clone adapter, check if it supports extended CAN protocol commands, else it will not work with this software.,v1.10,- support for HDI_SID807_BR2 ecu,- bug fixes
Disclaimer
Official Google Play Link
We do not host FAPlite Citroen/Peugeot OBD2 on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for FAPlite Citroen/Peugeot OBD2 is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
